Fig M544 - Gate Valve - Cast Iron

Object metadata

• _authorMark Thompson
• _BIMspec_GUID0
• _Bonnet Curve Flat Length23 mm
• _Bonnet Curve Radius12.5 mm
• _Bonnet Curve Width90 mm
• _Bonnet Gap0 mm
• _current revision1
• _distributed bywww.bimstore.co.uk
• _End Flange Hole Centres180 mm
• _End Flange Hole Diameter19 mm
• _End Flange Raised Diameter156 mm
• _End Flange Raised Height3 mm
• _Sweep Curve Radius20 mm
• _Sweep Height25 mm
• 12_HolesNo
• 4_HolesNo
• 8_HolesYes
• A mm229 mm
• Assembly CodeD30
• B mm24 mm
• Barcode0
• BodyCast Iron BS EN 1561 EN-JL1040
• Body Radius75.9 mm
• Body Seat RingBronze BS EN 1982 CC491K
• Body Width181 mm
• BonnetCast Iron BS EN 1561 EN-JL1040
• Bonnet Base Height20.3625 mm
• Bonnet Disk Depth13.575 mm
• Bonnet Disk Length162.9 mm
• Bonnet Disk Width200.376 mm
• Bonnet GasketAsbestos Free
• C mm220 mm
• Connection Size100 mm
• Connection Size Radius50 mm
• D mm520 mm
• DescriptionCrane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Complete with Bronze trim. Each valve is hydrostatically tested to BS5150. Manufactured in accordance with BS5150
• DocumentationLink URLwww.hattersley.com/documents/Fig_M544_544E_Gate_Valve_Hattersley_0813_v3.pdf
• E mm305 mm
• End ConnectionBS EN 1092-2 PN16
• Expected Life0
• GlandCast Iron BS EN 1561 EN-JLI030
• Gland Height136.2916667 mm
• Gland Length90 mm
• Gland Offset48 mm
• Gland PackingExpanded Graphite
• Handle MaterialCast Iron - Blue Paint
• HandwheelCast Iron BS EN 1561 EN-JL-1040
• Handwheel Depth30.5 mm
• Handwheel Nut Diameter25.41666667 mm
• Handwheel Nut Height12.70833333 mm
• Handwheel Radius152.5 mm
• K Coefficient923
• KeynoteS
• Loss Method2
• ManufacturerHattersley Ltd
• ModelM544
• OperatorHandwheel
• Pressure (BAR)www.hattersley.com/documents/Fig_M544_544E_Gate_Valve_Hattersley_0813_v3.pdf
• Pressure Rating (Cat)PN16
• Product DescriptionCast Iron Gate Valve
• Product Documentation Linkwww.hattersley.com/documents/Fig_M544_544E_Gate_Valve_Hattersley_0813_v3.pdf
• Product Page URLwww.hattersley.com/productView.asp?prodID=14&catID=2
• Specification NotesCast Iron with integral flanges. Outside screw pattern with rising stem. Ideal for use on more active media where fluid might have an adverse effect on thread. Flanges ends require no pipe threading. BS 5150 and BS EN 1171. Face to face dimensions at BS EN 558-1 basic series 3. Bronze trim
• StemSteel BS EN EN10087
• Stem Cone BushBrass BS EN 12164 CW614N
• Stem Corner Radius41.745 mm
• Stem Height136.2916667 mm
• Stem Loop Depth166.98 mm
• Stem Loop Width134.7058824 mm
• Stem Lower Circle Radius83.49 mm
• Stem Radius11.2962963 mm
• Temperature deg C-10 to 230
• Top of Stem132 mm
• Type Comments100mm
• Uniclass 2WR-90-94-95
• URLwww.hattersley.com/
• Valve MaterialCast Iron - Blue Paint
• Warranty Duration12 months
• Warranty Duration Unit12 months
• WedgeCast Iron 1561 EN-JL1040
• Wedge Facing RingBronze BS EN 1982 CC491K
• Wedge NutBronze BS EN 1982 CC491K
• Weight (kg)40
• YokeBronze BS EN 1982 CC491K
• Yoke JointAsbestos Free
• Yoke SleeveCast Iron BS EN 1561 EN-JLI030