Evomax - Wall Mounted Condensing Boiler (Configurations)

Manufacturer:Ideal Boilers
Model:Evomax - Wall Mounted Condensing Boiler (Configurations)
Revision:3
CI/SFB CODE:(56)
UNICLASS:60-45-40
OMNICLASS:23.75.10.11.14.14
Website:www.idealcommercialheating.com
Software:revit 2013
Last Updated:05 Jul 2017
Embed: Click to get code

Further Information

Available in outputs of 30, 40, 60, 80, 100, 120 and 150 kW, the Evomax is designed to ensure all installation requirements can be achieved. There is also an LPG Evomax range from 30 - 80 kW for off mains installations.

Features and benefits
• Largest range of outputs in market (30 - 150 kW)
• Robust & light aluminium silicon alloy heat exchanger
• Up to 110% part load efficiency
• High 5:1 turndown
• Compact – one width & height for easy siting
• Simple controls interface with large backlit display
• Comprehensive range of options
• Designed for easy installation, commissioning and servicing
• Quality product through design, component selection and proving
• NOx <40mg/kWh (Class 5) for all natural gas models
• 5 year parts and labour warranty

This download contains the Revit component for the Evomax Wall Mounted Condensing Boiler In-Line & Back to Back Configurations

Please note this is a large download and may take a few moments, please be patient.

Why not leave a Review

This is your chance to have your say. Have you enjoyed using this component. Let us know!

Other peoples comments

Ermintrude  Bimstore Cow

Ermintrude Bimstore Cow

13th April 2016 9:08

Joanna, thank you for your comment seems as if a few people have had this with a rogue parameter! the issue has now been resolved on all Ideal content and the listings updated, please download the component again and the issue should be remoooooooved

Joanna C

Joanna C

12th April 2016 16:16

I am having same problem when loading boiler to my Revit model: The shared parameter '48e4385a-72f4-438e-9e28-b3edf4c52c5f' cannot be added with name '_distributed by' and type 'Text' because it conflicts with the existing name '_distributed by' and type 'URL'.
is that something what you can help me with?

Jim Swinfield

Jim Swinfield

8th April 2016 12:35

Hi, I require a Side by Side 3 Boiler configuration of 180kw Output, 3 x 60kw boilers. This configuration is not available. Could you tell me how to resolve this please. I was going to insert the 170kw 3 side by side, then edit family so that all 3 boilers are 60kw versions, is this correct?

Ermintrude  Bimstore Cow

Ermintrude Bimstore Cow

2nd March 2016 11:06

Alex - we will contact you directly to resolve this. The clashing parameters are likely to be found in the Evomax model and another component already in your project.

Alex Wasyliw

Alex Wasyliw

26th February 2016 20:33

Did the below issue get resolved? same issue for me too. No idea why that parameter should be in my model already

Ermintrude  Bimstore Cow

Ermintrude Bimstore Cow

22nd December 2015 14:46

Hi Jeremy -

We will contact you directly to resolve this - it sounds like you have data parameters from different BIM objects clashing in your project.

Thanks for your feedback!

Jeremy Owen

Jeremy Owen

22nd December 2015 8:49

To be more helpful, get this error message.

The shared parameter '48e4385a-72f4-438e-9e28-b3edf4c52c5f' cannot be added with name '_distributed by' and type 'Text' because it conflicts with the existing name '_distributed by' and type 'URL'.

Jeremy Owen

Jeremy Owen

22nd December 2015 8:45

This does not work!

Show more
x

Check out Bimstore Eye!

BimstoreEye is our new Augmented reality application for your phone or tablet, download it and watch bimstore content pop up from manufacturers literature! Download it now on iOS!

Mascot